SSC JE Exam - cost estimates septic tank flexible pavements tube well footings steel truss piles pile caps valuation depreciation salvage sinking fund Online Test (MCQ Quiz)

1. What is the primary purpose of a septic tank?

A) To store rainwater for irrigation B) To treat domestic wastewater through anaerobic decomposition C) To purify water for drinking purposes D) To manage solid waste from industrial processes

2. Which of the following is a key component of a flexible pavement?

A) Reinforced concrete slab B) Asphalt concrete surface C) Granular base and sub-base layers D) Both B and C

3. In the context of cost estimates, what does 'flexibility' refer to in flexible pavements?

A) The ability to be easily repaired B) The ability to deform slightly under load without cracking C) The ease of widening the pavement D) The use of flexible materials like rubberized asphalt

4. What is a 'tube well' also commonly known as?

A) Surface well B) Dug well C) Borehole well D) Artesian well

5. Which factor is crucial for determining the cost of a tube well installation?

A) The color of the water B) The depth of the aquifer and the diameter of the bore C) The ambient temperature during installation D) The type of vegetation surrounding the well site

6. Footings are structural elements designed to transfer loads from a structure to the:

A) Superstructure B) Subgrade or soil C) Columns D) Beams

7. What is the main function of a steel truss?

A) To support vertical loads only B) To span large distances by distributing loads efficiently through a triangular framework C) To provide thermal insulation D) To store water

8. In cost estimation, 'prime cost' (PC) items for a steel truss typically include:

A) Labor for fabrication B) Cost of steel members and connections C) Painting and erection charges D) Transportation of fabricated members

9. What is a 'pile' in foundation engineering?

A) A horizontal beam supporting a floor B) A vertical structural element driven or bored into the ground to transfer loads to deeper strata C) A component of a roof structure D) A drainage channel

10. Which type of pile is commonly used when the soil near the surface is weak?

A) Sand pile B) Rock pile C) Displacement pile D) End-bearing pile

11. A 'pile cap' is a structural element used to:

A) Connect individual piles together and distribute the load from the column or wall above B) Prevent soil erosion around piles C) Increase the friction between piles and soil D) Provide a water seal for piles

12. What is 'valuation' in the context of civil engineering?

A) The process of calculating the cost of construction materials B) The process of determining the present worth or market value of a property or asset C) The measurement of structural integrity D) The estimation of environmental impact

13. Which of the following is a common method for property valuation?

A) Cost approach B) Income approach C) Sales comparison approach D) All of the above

14. 'Depreciation' refers to the decrease in the value of an asset over time due to:

A) Appreciation in market demand B) Wear and tear, obsolescence, and usage C) Inflationary economic factors D) Improvements made to the property

15. The 'straight-line method' of depreciation assumes:

A) Depreciation is higher in the early years B) Depreciation is constant over the useful life of the asset C) Depreciation is based on usage D) Depreciation is proportional to the asset's remaining value

16. What is 'salvage value'?

A) The initial cost of an asset B) The estimated resale value of an asset at the end of its useful life C) The cost of maintaining an asset D) The value of an asset after depreciation

17. 'Sinking fund' is a fund created to:

A) Provide for unexpected repairs B) Accumulate money over time to replace an asset or repay a debt C) Cover operating expenses D) Pay dividends to shareholders

18. The formula for calculating annual deposit in a sinking fund often involves:

A) Simple interest B) Compound interest C) Amortization D) Capitalization

19. For a septic tank, the 'effluent' is the:

A) Solid sludge at the bottom B) Scum layer at the top C) Liquid wastewater that flows out of the tank after solids have settled D) Inlet pipe carrying wastewater

20. Which of the following is NOT a typical layer in a flexible pavement structure?

A) Wearing course B) Binder course C) Sub-base course D) Concrete slab

21. The main advantage of flexible pavements over rigid pavements is:

A) Higher initial cost B) Greater resistance to fatigue cracking C) Lower maintenance costs D) Ability to withstand heavy loads without significant deformation

22. A 'percolation test' is commonly performed to determine the suitability of soil for:

A) Foundation support B) Septic tank leach fields C) Road construction D) Tunnel excavation

23. The cost of excavating for a footing is typically estimated based on:

A) The volume of excavation and the type of soil B) The depth of the finished floor C) The number of reinforcement bars D) The amount of concrete used

24. In a steel truss, the members are typically arranged in:

A) Rectangular patterns B) Circular shapes C) Triangular units D) Curved forms

25. The 'web members' of a steel truss are responsible for resisting:

A) Bending moments B) Shear forces C) Axial tension and compression D) Torsional forces

26. What is the primary function of a 'pile foundation'?

A) To distribute load over a wide area near the surface B) To transfer loads to a stronger stratum deep within the ground C) To provide lateral support to adjacent structures D) To improve soil permeability

27. A 'settlement analysis' for piles is crucial to ensure:

A) The piles are aesthetically pleasing B) The total and differential settlement of the structure is within acceptable limits C) The piles are resistant to corrosion D) The water table remains stable

28. When estimating the cost of a pile cap, which of the following is a significant cost component?

A) The cost of the column it supports B) The volume of concrete and the amount of reinforcement steel C) The depth of the groundwater table D) The type of soil above the pile heads

29. The 'capitalization method' of valuation is primarily used for:

A) Residential properties B) Industrial machinery C) Income-producing properties D) Vacant land

30. Which type of depreciation is often considered more realistic for accounting purposes?

A) Straight-line depreciation B) Declining balance depreciation C) Sum-of-the-years'-digits depreciation D) Units-of-production depreciation

31. The 'useful life' of an asset in depreciation calculations is:

A) The total lifespan of the asset B) The period over which the asset is expected to be economically useful C) The time taken for the asset to become obsolete D) The warranty period provided by the manufacturer

32. What is 'scrap value'?

A) The value of an asset at the end of its useful life when it has no further use B) The initial purchase price of an asset C) The value of an asset after depreciation D) The resale value of a fully functional asset

33. A sinking fund is similar in concept to:

A) A loan repayment schedule B) An annuity C) A perpetual bond D) A deferred payment

34. The 'disposal cost' of an asset at the end of its life needs to be considered when calculating:

A) Initial investment B) Annual depreciation C) Sinking fund requirements D) Salvage value

35. The design of a septic tank depends on:

A) The type of soil only B) The volume of wastewater generated and the required retention time C) The ambient temperature D) The proximity to the sea

36. In pavement design, the 'subgrade' is the:

A) Topmost layer of the pavement B) Layer beneath the base course, consisting of compacted natural soil or fill C) Layer providing skid resistance D) Layer immediately below the wearing course

37. A 'tube well strainer' is used to:

A) Increase water pressure B) Prevent sand and other debris from entering the well C) Filter out dissolved impurities D) Measure the water flow rate

38. Which type of footing is suitable for supporting a single column and is typically square or rectangular in shape?

A) Combined footing B) Strap footing C) Isolated footing D) Strip footing

39. The 'top chord' and 'bottom chord' are the main horizontal members of a:

A) Pile foundation B) Steel truss C) Septic tank D) Flexible pavement

40. Piles are primarily used when the surface soil is:

A) Strong and stable B) Weak or compressible C) Waterlogged D) Highly permeable

41. A 'floating foundation' is a type of raft foundation used when:

A) The soil has very high bearing capacity B) The weight of the foundation and structure is less than the weight of the soil excavated C) The site is prone to flooding D) The structure requires deep anchoring

42. Which valuation approach considers the potential income a property can generate?

A) Cost approach B) Sales comparison approach C) Income approach D) Market approach

43. In the 'declining balance method' of depreciation, the depreciation expense is:

A) Constant each year B) Higher in the early years and lower in the later years C) Lower in the early years and higher in the later years D) Dependent on the number of units produced

44. What does 'obsolescence' refer to in the context of depreciation?

A) Physical wear and tear B) Deterioration due to weather C) Becoming outdated due to technological advancements or changes in design D) Damage from accidents

45. The concept of 'sinking fund factor' is used to calculate:

A) The annual amount to be deposited in a sinking fund B) The total amount accumulated in the fund C) The interest rate required for the fund D) The number of years to reach the target amount

46. The cost estimate for a septic tank typically includes excavation, concrete work, formwork, and:

A) Waterproofing B) Electrical wiring C) Plumbing fixtures D) Landscaping

47. Which component of flexible pavement is designed to distribute wheel loads to the underlying layers?

A) Surface course B) Base course C) Sub-base course D) Subgrade

48. A 'well screen' in a tube well is designed to have:

A) Large openings to allow maximum water flow B) Small openings to prevent fine particles from entering C) No openings, acting as a solid casing D) A filter that requires frequent replacement

49. When estimating the cost of footings, 'reinforcement steel' is calculated based on:

A) The volume of concrete B) The weight of the steel bars required C) The perimeter of the footing D) The depth of the excavation

50. The 'nodes' in a steel truss are points where:

A) Members are welded B) Members are connected and loads are applied C) The truss is supported D) Bracing is attached

cost estimates septic tank flexible pavements tube well footings steel truss piles pile caps valuation depreciation salvage sinking fund - Online Test

Test Results