JEE Main - Heat capacity Hess's law and enthalpies of various processes Online Test (MCQ Quiz)

1. What is the definition of heat capacity?

A) The amount of heat required to raise the temperature of a substance by 1 degree Celsius. B) The amount of heat required to melt 1 mole of a substance at its melting point. C) The amount of heat required to vaporize 1 mole of a substance at its boiling point. D) The change in internal energy of a system at constant volume.

2. What is the relationship between heat capacity (C) and specific heat capacity (c)?

A) C = m * c, where m is mass B) c = C * m, where m is mass C) C = c / m, where m is mass D) c = C / m, where m is mass

3. Which of the following is a unit of heat capacity?

A) J/mol B) J/K C) J/mol·K D) J

4. What does Hess's Law state?

A) The enthalpy change for a reaction is independent of the pathway taken. B) The enthalpy change for a reaction is dependent on the temperature. C) The enthalpy change for a reaction is always positive. D) The enthalpy change for a reaction is zero if it is an equilibrium reaction.

5. Hess's Law is a direct consequence of which law of thermodynamics?

A) Zeroth Law B) First Law C) Second Law D) Third Law

6. Which process involves the enthalpy change associated with the formation of 1 mole of a compound from its constituent elements in their standard states?

A) Enthalpy of vaporization B) Enthalpy of fusion C) Enthalpy of formation D) Enthalpy of combustion

7. What is the standard enthalpy of formation of an element in its most stable form at standard conditions?

A) Always positive B) Always negative C) Zero D) Depends on the element

8. The enthalpy change for the conversion of 1 mole of a solid into a liquid at its melting point is known as:

A) Enthalpy of sublimation B) Enthalpy of fusion C) Enthalpy of vaporization D) Enthalpy of solution

9. The enthalpy change for the conversion of 1 mole of a liquid into a gas at its boiling point is called:

A) Enthalpy of fusion B) Enthalpy of sublimation C) Enthalpy of vaporization D) Enthalpy of neutralization

10. What is the enthalpy of combustion?

A) The enthalpy change when 1 mole of a substance reacts completely with oxygen. B) The enthalpy change when 1 mole of a substance dissolves in a solvent. C) The enthalpy change when 1 mole of a compound is formed from its elements. D) The enthalpy change when 1 mole of a substance is converted from solid to gas.

11. The enthalpy change when 1 mole of a solute dissolves in a solvent to form an infinitely dilute solution is termed:

A) Enthalpy of hydration B) Enthalpy of lattice formation C) Enthalpy of solution D) Enthalpy of atomization

12. Which type of heat capacity is relevant for reactions occurring at constant volume?

A) Heat capacity at constant pressure (Cp) B) Heat capacity at constant volume (Cv) C) Molar heat capacity D) Specific heat capacity

13. For an ideal gas, the relationship between Cp and Cv is:

A) Cp - Cv = R B) Cv - Cp = R C) Cp + Cv = R D) Cp = Cv

14. What is the specific heat capacity of water?

A) 1 J/g·K B) 4.184 J/g·K C) 100 J/g·K D) 0.1 J/g·K

15. If a reaction can be carried out in multiple steps, the total enthalpy change is the sum of the enthalpy changes of the individual steps according to:

A) The First Law of Thermodynamics B) The Second Law of Thermodynamics C) Hess's Law D) Kirchhoff's Law

16. Enthalpy of neutralization is typically defined for the reaction between:

A) A strong acid and a weak base B) A weak acid and a weak base C) A strong acid and a strong base D) An oxidizing agent and a reducing agent

17. The enthalpy change for the process A(s) -> A(g) is called the enthalpy of:

A) Fusion B) Vaporization C) Sublimation D) Dissociation

18. Which of the following represents the enthalpy of lattice formation for an ionic compound?

A) The energy released when gaseous ions combine to form a solid ionic lattice. B) The energy required to break apart 1 mole of an ionic solid into its constituent gaseous ions. C) The energy change when an ionic compound dissolves in water. D) The energy change when gaseous ions form hydrated ions.

19. The enthalpy change associated with the formation of gaseous ions from a neutral gaseous atom is called:

A) Electron affinity B) Ionization enthalpy C) Enthalpy of atomization D) Enthalpy of formation

20. If Cp > Cv, it implies that during heating at constant pressure, some energy is used for:

A) Increasing internal energy only B) Doing work on the surroundings C) Decreasing the volume D) Phase change

21. Consider the reaction: C(graphite) + O2(g) -> CO2(g), ΔH = -393.5 kJ/mol. This ΔH represents the:

A) Enthalpy of formation of CO2 B) Enthalpy of combustion of graphite C) Both (a) and (b) D) Neither (a) nor (b)

22. Hess's Law is particularly useful for calculating the enthalpy change of reactions that are:

A) Very fast B) Difficult to carry out directly C) Exothermic D) Endothermic

23. The enthalpy change for the process H2O(l) -> H2O(g) at 100°C is:

A) Enthalpy of fusion B) Enthalpy of sublimation C) Enthalpy of vaporization D) Enthalpy of solution

24. Which of the following has the highest molar heat capacity at constant pressure?

A) Helium (He) B) Hydrogen (H2) C) Water (H2O) D) Carbon Dioxide (CO2)

25. The enthalpy change for the process H2O(s) -> H2O(l) at 0°C is:

A) Enthalpy of vaporization B) Enthalpy of fusion C) Enthalpy of sublimation D) Enthalpy of crystallization

26. For a given substance, Cp is generally greater than Cv because:

A) At constant pressure, more heat is needed to achieve the same temperature rise as some energy goes into expansion work. B) At constant volume, more heat is needed to achieve the same temperature rise. C) Cp represents the heat absorbed during phase change, while Cv does not. D) Cv represents the heat absorbed during phase change, while Cp does not.

27. Consider the formation of ammonia from nitrogen and hydrogen: N2(g) + 3H2(g) -> 2NH3(g). If the enthalpy of formation of NH3 is -46.1 kJ/mol, what is the enthalpy change for this reaction?

A) -46.1 kJ B) +46.1 kJ C) -92.2 kJ D) +92.2 kJ

28. What is the enthalpy of atomization?

A) The enthalpy change when 1 mole of a compound is formed from its gaseous atoms. B) The enthalpy change when 1 mole of a substance is converted into its constituent gaseous atoms. C) The enthalpy change when 1 mole of a substance reacts with oxygen. D) The enthalpy change when 1 mole of a substance melts.

29. If a reaction is reversed, the sign of the enthalpy change is:

A) The same B) Opposite C) Doubled D) Halved

30. The enthalpy of hydration refers to the enthalpy change when:

A) An ionic compound dissolves in water. B) Gaseous ions are surrounded by water molecules. C) Water molecules are decomposed. D) Gaseous molecules form a liquid.

31. Which of the following processes is endothermic?

A) Combustion of methane B) Neutralization of HCl by NaOH C) Melting of ice D) Formation of water from H2 and O2

32. According to Hess's Law, if a reaction is multiplied by a factor 'n', the enthalpy change is also multiplied by:

A) n B) 1/n C) n^2 D) sqrt(n)

33. The heat capacity of a system is defined as the ratio of heat added to:

A) The mass of the system B) The number of moles C) The resulting temperature change D) The pressure change

34. Which of the following is an example of a process with a standard enthalpy of formation equal to zero?

A) H2O(l) -> H2O(g) B) C(diamond) -> C(graphite) C) O2(g) -> O2(g) D) NaCl(s) -> Na+(g) + Cl-(g)

35. The enthalpy change for the process Br2(l) -> Br2(g) at its boiling point is:

A) Enthalpy of fusion B) Enthalpy of atomization C) Enthalpy of vaporization D) Enthalpy of sublimation

36. If ΔH is negative for a process, it is:

A) Endothermic B) Exothermic C) Isothermal D) Adiabatic

37. The enthalpy change for the reaction: H2(g) + 1/2 O2(g) -> H2O(l) is -285.8 kJ/mol. This value represents the:

A) Enthalpy of formation of liquid water B) Enthalpy of combustion of hydrogen C) Both (a) and (b) D) Neither (a) nor (b)

38. What is the molar heat capacity of a substance?

A) The heat capacity per gram of substance. B) The heat capacity per mole of substance. C) The heat capacity of the substance at constant volume. D) The heat capacity of the substance at constant pressure.

39. Hess's Law allows us to calculate enthalpy changes for reactions that are:

A) Reversible B) Irreversible C) Spontaneous D) Non-spontaneous

40. The enthalpy of sublimation is equal to the sum of:

A) Enthalpy of fusion and enthalpy of vaporization B) Enthalpy of vaporization and enthalpy of atomization C) Enthalpy of fusion and enthalpy of atomization D) Enthalpy of formation and enthalpy of combustion

41. Which of the following is an example of an endothermic process?

A) Respiration B) Photosynthesis C) Combustion D) Neutralization

42. The enthalpy change when 1 mole of an ionic compound is formed from its gaseous ions is:

A) Enthalpy of solution B) Enthalpy of hydration C) Enthalpy of lattice formation D) Enthalpy of atomization

43. For a diatomic ideal gas, the ratio Cp/Cv is approximately:

A) 1.4 B) 1.67 C) 1.33 D) 1.2

44. Consider the reaction: A -> B. If this reaction can be achieved in two steps, A -> C and C -> B, with enthalpy changes ΔH1 and ΔH2 respectively, then according to Hess's Law, the enthalpy change for A -> B is:

A) ΔH1 - ΔH2 B) ΔH2 - ΔH1 C) ΔH1 + ΔH2 D) ΔH1 * ΔH2

45. The enthalpy of fusion of ice at 0°C is approximately 6.01 kJ/mol. This means that:

A) 6.01 kJ of heat is released when 1 mole of ice melts. B) 6.01 kJ of heat is absorbed when 1 mole of ice melts. C) 6.01 kJ of heat is released when 1 mole of water freezes. D) Both (b) and (c)

46. Kirchhoff's Law relates the change in enthalpy of a reaction to:

A) Pressure B) Volume C) Temperature D) Entropy

47. Which of the following has the lowest specific heat capacity?

A) Water B) Sand C) Iron D) Aluminum

48. The enthalpy of atomization of methane (CH4) is the enthalpy change for which process?

A) CH4(g) -> C(s) + 2H2(g) B) CH4(g) -> C(g) + 4H(g) C) CH4(g) -> CO2(g) + 2H2O(g) D) CH4(g) -> CH3(g) + H(g)

49. When an ionic solid dissolves in water, if the lattice enthalpy is greater in magnitude than the hydration enthalpy, the process is:

A) Exothermic B) Endothermic C) Isothermal D) Isobaric

50. The enthalpy of combustion is always:

A) Positive B) Negative C) Zero D) Variable

Heat capacity Hess's law and enthalpies of various processes - Online Test

Test Results