SSC JE Exam - standard tests uses manufacture quarrying of materials Online Test (MCQ Quiz)

1. Which standard test is primarily used to determine the crushing strength of building stones?

A) Impact Test B) Abrasion Test C) Crushing Strength Test D) Water Absorption Test

2. The Los Angeles Abrasion Test is commonly used to assess the durability of which construction material?

A) Cement B) Aggregates C) Bricks D) Timber

3. What is the primary purpose of the Atterberg Limits test for fine-grained soils?

A) To determine the shear strength B) To classify the soil based on its plasticity C) To measure the permeability D) To assess the compaction characteristics

4. The Sand Absorption Test is performed on aggregates to determine:

A) Their resistance to weathering B) The percentage of water they absorb C) Their shape and texture D) Their crushing value

5. Which test is crucial for determining the soundness of aggregates, indicating their resistance to disintegration due to weathering?

A) Specific Gravity Test B) Sieve Analysis C) Soundness Test D) Flakiness and Elongation Index Test

6. The impact test on building stones is performed to measure:

A) Their resistance to sudden shock or blow B) Their compressive strength C) Their porosity D) Their resistance to abrasion

7. What property of cement is assessed by the Vicat apparatus?

A) Soundness B) Fineness C) Setting time D) Compressive strength

8. The Le Chatelier test is used to determine which property of cement?

A) Setting time B) Fineness C) Soundness (especially for free lime) D) Compressive strength

9. Fineness of cement is important because it affects:

A) The ultimate strength and durability of concrete B) The initial setting time C) The workability of the fresh concrete D) The heat of hydration

10. Which test is performed on cement to determine its ability to resist volume changes after setting?

A) Soundness Test B) Fineness Test C) Tensile Strength Test D) Initial Setting Time Test

11. The standard consistency of cement is determined using:

A) Le Chatelier apparatus B) Vicat apparatus C) Blaine's air permeability apparatus D) Sieve analysis

12. What is the primary objective of the compressive strength test for cement mortar cubes?

A) To determine the workability of the mix B) To assess the rate of hydration C) To ensure the cement meets specified strength requirements D) To measure the heat of hydration

13. The slump test is a field test used to measure the:

A) Compressive strength of concrete B) Workability of fresh concrete C) Setting time of concrete D) Durability of hardened concrete

14. Which test is performed on concrete to determine its resistance to wear and tear?

A) Rebound Hammer Test B) Permeability Test C) Abrasion Test D) Tensile Strength Test

15. The Rebound Hammer test is a non-destructive method used to estimate the:

A) Workability of concrete B) Tensile strength of concrete C) Compressive strength of concrete D) Setting time of concrete

16. What is the purpose of the sieve analysis test on aggregates?

A) To determine their specific gravity B) To determine their particle size distribution C) To measure their water absorption D) To assess their impact value

17. The Flakiness Index and Elongation Index tests are performed on aggregates to assess their:

A) Strength B) Shape C) Hardness D) Porosity

18. Which test is used to determine the adhesion of bitumen to aggregate?

A) Softening Point Test B) Ductility Test C) Stripping Test D) Penetration Test

19. The softening point of bitumen is an indicator of its:

A) Viscosity at high temperatures B) Resistance to flow at elevated temperatures C) Ductility D) Flash point

20. The penetration test for bitumen measures its:

A) Hardness B) Ductility C) Viscosity D) Softening point

21. Ductility test for bitumen determines its ability to:

A) Resist deformation under load B) Be stretched into a thread without breaking C) Withstand high temperatures D) Adhere to aggregates

22. What is the primary use of the standard consistency test for cement?

A) To determine the rate of hydration B) To establish the amount of water required for a normal consistency paste C) To measure the heat generated during hydration D) To assess the compressive strength of the cement

23. The initial and final setting times of cement are determined using:

A) Le Chatelier apparatus B) Vicat apparatus C) Blaine's apparatus D) Cube moulds

24. Which test is performed on bricks to determine their resistance to weathering action?

A) Crushing Strength Test B) Water Absorption Test C) Acid Resistance Test D) Efflorescence Test

25. The water absorption test for bricks is typically performed after:

A) Heating in a furnace B) Soaking in water C) Exposure to acid D) Impact loading

26. What does the crushing strength test for bricks primarily indicate?

A) Their resistance to fire B) Their ability to withstand compressive loads C) Their resistance to chemical attack D) Their thermal insulation properties

27. The efflorescence test for bricks is conducted to detect the presence of:

A) Free lime B) Soluble salts C) Excessive moisture D) Cracks

28. Which test is performed on timber to determine its resistance to decay or insect attack?

A) Moisture Content Test B) Strength Test C) Preservative Treatment Test D) Fire Resistance Test

29. The moisture content test for timber is important for:

A) Determining its density B) Assessing its strength and stability C) Measuring its thermal conductivity D) Evaluating its fire resistance

30. What is the primary purpose of quarrying stone for building materials?

A) To extract ore for metal production B) To obtain rock suitable for construction purposes C) To mine for precious gems D) To extract fuel resources

31. Which factor is crucial when selecting a site for quarrying building stones?

A) Proximity to residential areas B) Geological formation and quality of the rock C) Availability of water bodies D) Presence of dense vegetation

32. The crushing strength of stone is a measure of its ability to resist:

A) Tensile forces B) Shear forces C) Compressive forces D) Bending moments

33. A low water absorption value in building stone generally indicates:

A) Higher porosity B) Greater durability C) Lower strength D) Increased susceptibility to frost action

34. The abrasion test for aggregates is designed to measure their resistance to:

A) Impact B) Weathering C) Grinding and wearing away D) Chemical attack

35. What is the primary objective of the soundness test for aggregates?

A) To determine their particle shape B) To evaluate their resistance to disintegration from weathering C) To measure their specific gravity D) To assess their sieve analysis

36. The specific gravity of aggregates is important for:

A) Determining their workability B) Calculating the volume and density of concrete C) Measuring their setting time D) Assessing their fire resistance

37. Which test is used to determine the percentage of fine particles (fines) in aggregates?

A) Sieve Analysis B) Impact Test C) Abrasion Test D) Soundness Test

38. Blaine's air permeability apparatus is used to determine the:

A) Setting time of cement B) Fineness of cement C) Soundness of cement D) Compressive strength of cement

39. The heat of hydration test for cement is important for understanding:

A) The rate of strength gain B) The potential for cracking in mass concrete C) The workability of the mix D) The final setting time

40. Which test is performed on concrete to assess its resistance to chloride penetration?

A) Permeability Test B) Abrasion Test C) Rebound Hammer Test D) Slump Test

41. The Bolt's test is a field method for determining:

A) Compressive strength of concrete B) Workability of concrete C) Setting time of concrete D) Tensile strength of concrete

42. What is the primary purpose of the impact value test for aggregates?

A) To determine their resistance to crushing B) To measure their resistance to sudden shock C) To assess their shape D) To determine their water absorption

43. The aggregate impact value gives an indication of the:

A) Toughness of the aggregate B) Hardness of the aggregate C) Brittleness of the aggregate D) Porosity of the aggregate

44. Which test is performed on bitumen to determine its susceptibility to temperature changes?

A) Ductility Test B) Penetration Test C) Softening Point Test D) Viscosity Test

45. The viscosity of bitumen is important for:

A) Its resistance to weathering B) Its ability to coat aggregates and its flow characteristics C) Its penetration value D) Its softening point

46. What is the main objective of the stripping test for bitumen and aggregate mixtures?

A) To measure the strength of the bond B) To assess the adhesion between bitumen and aggregate C) To determine the workability of the mix D) To measure the water absorption

47. The fineness modulus of an aggregate is an index of its:

A) Shape B) Specific gravity C) Particle size distribution D) Strength

48. Which standard test is used to determine the potential for alkali-aggregate reaction in concrete?

A) Rapid Chloride Permeability Test B) Concrete Prism Test C) Slump Test D) Rebound Hammer Test

49. The fire resistance of building materials can be assessed through tests that measure:

A) Their thermal conductivity B) Their ability to withstand high temperatures and flame impingement C) Their water absorption D) Their impact resistance

50. The specific gravity of cement is determined using a:

A) Le Chatelier flask B) Vicat apparatus C) Blaine's apparatus D) Pycnometer

standard tests uses manufacture quarrying of materials - Online Test

Test Results